Page Comparison

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.10.11

HDD PowerTool 

Bug Fixes 

1. Fixed an issue where the GIS elevation profile would not generate and the pipe entry and exit lengths were not displayed (TT-11593). 

AC Mitigation PowerTool 

Bug Fixes 

2. Fixed an issue where the excel report had the pipelines missing when only mitigated results were executed (TT-11456). 

3. Fixed an error where the section data would not be displayed on the UI upon save when the section was still being calculated (TT-11455). 

RSTRENG+ 

Enhancements 

1. Updated the units for Corrosion Growth Rate from inch/year to mpy (mil/year) (TT-11597). 

Bug Fixes 

1. Fixed an error where save as was corrupting the profile data (TT-11597). 

API Toolbox 

Bug Fixes 

1. Internal bottom settlement graphs are improved to show circles in ratio to its diameter 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.10.04

AC Mitigation PowerTool 

Bug Fixes 

1. Fixed the following issues in AC Mitigation PowerTool:

   1. The report in the Steady State application was incorrectly mapping Barnes Layer values to Apparent Layer and vice-versa (TT-11589).

   2. The node faulted in the Fault Current application would not highlight after calculating the case (TT-11562). 

API Toolbox 

Bug Fixes 

1. API 510 > The tmin values are getting pulled from Shell and Head calcs on to Component life evaluation.

2. Asset management > PSV search result had a missing report icon, that got corrected.

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.09.27 

AC Mitigation PowerTool 

Bug Fixes 

1. Fixed the following issues in AC Mitigation PowerTool:

   1. Fixed an error in the reports where the phase wire data was mislabeled as GMR (TT-11407).

   2. Fixed an error in the report where the data was being pulled from the database and not from the UI (TT-11567). 

API Toolbox 

Enhancements 

1. The following enhancements have been added to the API Toolbox:

   1. 510 CML page made static so users can see the header of the columns when scrolling

   2. Horizontal Tanks calculations in API 510 now pulls in data from the base Report Builder page

Encroachment Manager 

Enhancements 

1. Users can now upload .pdfs, word .docs and images to their encroachments (TT-11576).

   1. Reports run on these encroachments shows all .pdf’s attached. 

RSTRENG 

Enhancements 

1. The RSTRENG application has been updated with the following (TT-11248):

   1. Wheel Count has been added to the report

   2. Added pipe catalog for selecting industry wide standard pipes

   3. 'Remaining Life’ section of the application is now included in the report

Bug Fixes 

1. Fixed an error where the wheel count value was coming from the previous case and was not saving to database while not being printed in the report (TT-10652). 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.09.13 

API Toolbox 

Bug Fixes 

1. Fixed the following issues with tabs in API Toolbox:

   1. Closing a tab when there are already more than 5 on the dashboard was not working properly.

   2. Users in API 570 would incorrectly receive a pop-up stating their CML application was already open after re-opening the application. 

Hydrotest PowerTool 

Bug Fixes 

1. Fixed an issue in Hydrotest PowerTool where Temperature Derating Factor on Gas analyses was not displayed properly (TT-11506). 

PLTB 

Bug Fixes

1. Fixed an issue in the following Design & Stress applications where the Net Longitudinal Stress value was not calculated with 75% per the newest revision of B31.4 (TT-11549). 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.09.10 

HUB Platform 

Enhancements 

1. The Batch Run case limit in Pipeline Crossings > CEPA applications has been increased to 100. 

2. User’s reports for the following modules now include their Sensitivity Analysis study in it if they’ve created one:

   1. PLTB > Pipeline Crossings

   2. HDD PowerTool > Cables & Conduits and Pull Force & Installation Stresses applications 

3. A session timeout counter pop-up has been added for users that leave their browser session open for under 1 hour. 

PLTB 

Bug Fixes 

1. Fixed an issue in Surge Analysis – Water Hammer application where Results: Node Pressures would not export to Excel (TT-10993). 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.08.30 

AC Mitigation PowerTool 

Enhancements 

1. Input validations have been added to AC Mitigation Steady State to instruct the user to recalculate their sections when a user adds or deletes powerlines or pipelines to their case. 

Bug Fixes 

1. Fixed an issue in AC Mitigation Steady State where creating a new section would overwrite all sections with the mitigation of the first one (TT-11519). 

HUB Platform 

Bug Fixes 

1. Fixed an issue where users were unable to assign a date to cases (TT-11538). 

PLTB 

Enhancements 

1. The Surge Analysis – Water Hammer application has been updated to allow users to add results tables and plots for Node Pressures and Flow Rates to the report (TT-11188). 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.08.23 

AC Mitigation PowerTool 

Bug Fixes 

1. Fixed the following issues in AC Mitigation PowerTool – Steady State application:

   1. The bond table in the Mitigation tab would not allow a user to scroll through (TT-517)

   2. Calculations could not complete for sections that did not intersect Powerlines or Pipelines (TT-11527) 

PLTB 

Bug Fixes 

1. Fixed an issue in calculations for API 1102 Railroads applications where k_mu reference was not properly accounted for in Stiffness Factor for Earth Load Circumferential Stress  (TT-11473). 

2. Fixed an issue in Maximum Allowable Pipe Span Length where Youngs Modulus of Elasticity was not converting to Metric units properly (TT-11164). 

Map 

Bug Fixes 

1. Fixed an issue in the ESRI Map application where the satellite/terrain toggle button would disappear after importing an entity (TT-11313). 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.08.16 

API Toolbox 

Enhancements 

1. Module API 570 in API Inspectors Toolbox have been updated to allow users to undo LT/ST analyses. 

PLTB 

Bug Fixes 

1. Fixed an issue in calculations for API 1102 Highway applications where k_mu reference was not properly accounted for in Stiffness Factor for Earth Load Circumferential Stress  (TT-11473). 

PRCI OBS 

Bug Fixes 

1. Fixed an issue in Level 2 calculations where Water Depth was incorrectly flagged for input validation when an existing case was calculated (TT-11491). 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.08.09 

API Toolbox 

Enhancements 

1. The notification for shared cases now contains information on Modules to which the shared reports belong to 

PLTB 

Enhancements 

1. Purging Calculations within the Testing module has been updated to include the following (TT-11392): 

   1. Added fluid directive for user to select different fluid types 

   2. Calculation was updated to use the specific gravity of the fluid selected 

   3. Custom blow-off sizes 

   4. Custom blow-off coefficients 

   5. The associated report(s) have been updated 

Bug Fixes 

1. Fixed an issue AGRA & GRPA > Accidental Release through a small pipeline where the flow rate was not being calculated properly (TT-11452). 

2. Fixed an issue in API 1102 Pipeline Highway applications where the friction force coefficient was not changing properly with change of Soil Type (TT-11473). 

PRCI OBS 

Bug Fixes 

1. Fixed an issue in Level 2 calculations where the Sigma A and B coefficients were unable to be updated when JONSWAP was selected for Spectral Setting (TT-11491).

AC Mitigation 

Bug Fixes 

1. Fixed an issue where the distributed anode ground from the first section gets copied over to other sections where mitigation is applied (TT-11482).

2. Fixed an issue related to pipeline and powerline data changing after mitigation and calculation (TT-11032).

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.08.02 

HDD PowerTool   

Enhancements 

1. Google Maps and GIS functionality has been consolidated into one application for all applications, where users build a borehole profile using ESRI Map.

API Toolbox 

Enhancements 

1. Uploaded photos now have editable names in the Appendix 

2. API 653 now has the ability to add user defined tmins 

3. API 570 now highlights the governing component in the Component Remaining Life report.  

4. CML template modified to include LT/ST changes 

Bug Fixes 

1. Fixed an issue in API 653 where label changes to the Roof and Floor labels were not being properly updated in the Appendix A, CML page (TT-11468). 

AC Mitigation PowerTool 

Bug Fixes 

1. Fixed an issue where section data was incorrectly shown for all sections after the first one (TT-11470). 

PLTB 

Enhancements 

1. Reports now show the Pipe Regulatory Code chosen by a user for analysis where applicable. 

Bug Fixes 

1. Fixed an issue AGRA & GRPA > Accidental Release through a small pipeline where the flow rate was not being calculated properly (TT-11452). 

2. Fixed an issue in API 1102 Pipeline Highway applications where the friction force coefficient was not changing properly with change of Soil Type (TT-11473). 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.07.19 

API Toolbox   

Enhancements 

1. The following enhancements have been added to the API 570 module:

   1. Ability to add user defined tmins.

   2. Enhanced calc to calculate remaining life based on LT and ST corrosion rates and modified the report to include it. 

Hydrotest PowerTool   

Enhancements 

1. Added new input parameter called ‘Test Pressure Factor’ for cases that are in line with B31.8/B31.4 for gas and liquid. 

Crossings Workflow 

Bug Fixes 

1. Fixed an issue where the ‘Soil Type’ drop-down was changing values after clicking ‘Calculate’ (TT-11434).  

ESRI Map 

Bug Fixes 

1. Fixed an issue in the ESRI Map application where reopening a mapping to an entity in the import screen was clearing the screen (TT-10979). 

PRCI OBS 

Bug Fixes 

1. Fixed an issue in Level 2 Batch Run where ‘Water Depth’ was able to be added to your batch (TT-11439). 

2. Fixed issue for license related access for Level 1 and Level 2 (TT-11442). 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.07.12 

API Toolbox   

Enhancements 

1. The following changes have been done to API 510: 

   1. SH has been removed from the logic of the SH and Head calculation applications 

   2. Users are now able to disable Chamber 2 in the Final Report Builder application from going to the report if not applicable to the inspection. 

2. The API 570 Final Report Builder application has been updated to allow users to choose the tmin values based on the piping material (CS) and (SS). 

3. Users have been provided an option in all 3 modules (653, 510, 570) to skip printing appendix pages to final report 

ESRI Map 

Bug Fixes 

1. Fixed an issue in the ESRI Map application where .kmz/.kml/.gdb were unable to be imported if there were special characters in the entity’s name from Google Maps or arcGIS (TT-11313).

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.07.05 

API Toolbox   

Enhancements 

1. A new pipe insulation type ‘Uninsulated’ has been added to the API 570 Final Report Builder. 

Bug Fixes 

1. Fixed an issue in API 570 where users were unable to create a new report in the ASME VIII application. 

AC Mitigation PowerTool   

Enhancements 

1. Fault Current applications’ faulted node visualization has been replaced with a highlighting of the powerline over the section where the fault occurs (TT-11345). 

HDD PowerTool 

Bug Fixes 

1. Fixed an issue in HDD PowerTool > Steel Pipe applications where Reduced Wall Thickness checkbox was not saving to the case.  

PLTB 

Bug Fixes 

1. Fixed an issue in HDD Lite > Steel Pipe applications where Reduced Wall Thickness checkbox was not saving to the case. 

2. Fixed an issue in API 1117 – Movement of In-Service Pipeline applications where Pipe Design Factor was not saving to the case.  

3. Fixed an issue in CEPA Wheel Load Analysis where the Impact Factor was incorrectly overwritten with the interpolated value if the ‘Pavement Type’ was set to ‘User Defined’. 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.06.28

API Toolbox   

Enhancements 

1. Users are now able to transfer ownership of reports in API 653, 510, and 570 modules:

   • Users can request ownership of reports owned by another user provided they are shared with the user requesting ownership

   • Users who transfer ownership of a report to another can view the transferred report but no longer make edits 

2. The following modifications have been made to API 510:

   • The CML page report has been updated with grid lines to improve readability

   • A new pressure field ‘MAEWP’ has been added to the Report Builder main page 

AC Mitigation PowerTool   

Enhancements 

1. Cases now have a new checkbox called ‘Disable Mitigation’ that allows users to toggle mitigation on/off on their cases without having to delete/re-do mitigation (TT-11218). 

2. The Fault Current application now populates a powerline name if any when selecting from the list of powerlines configured (TT-11375). 

3. Users can now save their graph settings as part of their case data (TT-11258).

   1. When the case is loaded up again, the graph settings set before saving are now retained. 

Bug Fixes 

1. Fixed an issue where individual plots for induced current and voltages were not included in the report (TT-11403, TT-11142). 

2. Fixed an issue where the unmitigated plot was showing the mitigated plot in the reports (TT-11407). 

3. Fixed an issue where the section lines wouldn't show up in the overview (sections tab) when calculate of angles and distances was clicked once and the results wouldn't update in the plot when calculate for the analysis was clicked. However, both sections and results showed up on the second click (TT-11364).  

HDD PowerTool 

Bug Fixes 

1. Fixed an issue in HDD PowerTool Steel applications where failure indicators on stress calculations were incorrectly highlighted (TT-11404).  

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.06.21  

AC Mitigation PowerTool   

Enhancements  

1. The following modifications have been made to the AC Mitigation PowerTool applications:

   • The Induced Current and Current Density columns in the results plot have been switched to make easier interpretation of Current Density results. 

   • The reference line used by a user for calculating sections is now saved for a user’s cases. 

   • The Powerline section of the Steady State application’s report has been updated to offer better user experience on viewing data. 

Bug Fixes  

1. Fixed an issue where users with more than 20 sections would see their scrollbar disappear in the Section Lines sub-tab (TT-11364). 

Hydrotest PowerTool 

Enhancements 

1. The Hydrotest PowerTool has been updated with pipe regulatory codes for CSA Z662 in addition to the existing B31.4 and B31.8 codes.  

   1. This includes catalog changes for: 

      • Design class and Location factor

      • Joint type and Joint factor

      • Temperature derating factor

In addition to the above, Low Vapor Pressure and High Vapor Pressure, Fluid Type were added and Test Pressure Factor. 

PTLB 

Bug Fixes 

1. Fixed an error in the following Design & Stress Analysis applications where using Reduced Wall Thickness would apply an incorrect unit conversion (TT-11367, TT-11377).

   • Design Pressure

   • Maximum Allowable Pipe Span Length 

2. Fixed an error in Regulator & Station Piping Sizing application where the report wouldn't generate (TT-11389). 

API Toolbox   

Bug Fixes

1. Aspect ratio applied to images uploaded on base page of Report Builder to show images correctly with reduced size. This is done for 510, 653 and 570 modules. 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.06.14  

API Toolbox   

Enhancements  

1. Users are now able to edit/rename their reports in the 653/510/570 Final Report Builders. 

2. New Construction Codes of API-12C and API-12F have been added to the API 653 Final Report Builder. 

ESRI Maps

Bug Fixes 

• Fixed an issue in the ESRI Maps application where users were not able to manually draw features (pipelines, powerlines) or import kml/kmz data files(TT-11349). 

AC Mitigation   

Bug Fixes 

1. Fixed an error in Fault Current where the individual plots were missing some plots and legends (TT-11355). 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.05.31

HUB Platform  

Bug Fixes  

1. Fixed an issue where the hierarchy panel would disappear after 20 seconds when HDD Borehole Stability calculation was opened (TT-11317). 

AC Mitigation

Bug Fixes 

1. Fixed an issue related to the decimal digit being restricted to two decimals and not to the configuration of the measurable property associated for the pipeline tab and sections tab (TT-11322). 

2. Fixed an issue where the cases were not being saved with a project name (TT-11274). 

3. Fixed an issue related to adding new section lines via ESRI map would have default resistivity data and would not get the data from the section line above. 

4. Fixed an issue for calculating sections lines in ESRI (TT-11050).

API Toolbox 

Bug Fixes  

1. Issue got fixed for API  510 for sections if left blank will add section headers as section data in write up upon import 

2. Issue fixed in API 570 for import process with no CML data bringing in blank checklist, losing data from checklist. 

3. API 510, corrected the tmin logic on nozzle evaluation. 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2024.05.24  

PLTB  

Enhancements  

1. Compressor Station Piping – Pipe Wall Thickness calculation with Pipeline Compressor (PLTB -G), Pump Station Piping – Pipe Wall Thickness calculation in Pipeline Pump (PLTB – L) and Regulator & Station Piping Sizing calculation within Regulators & Meters (PLTB -G) have all been updated with pipe regulatory codes for CSA Z662, in addition to the existing B31.4 and B31.8 codes. These include catalog changes for design class and location factor, joint type and joint factor, and temperature derating factor.  

Bug Fixes  

1. Fixed an issue in Maximum Pipe Span Length calculation of Design & Stress Analysis where the validation message for operating pressure does not account for the unit of pressure, and instead just evaluates the number inputted into the calculator against the limit (TT-11254). 

AC Mitigation  

Enhancements  

1. Released new pdf report template in the Steady State application for a better user experience. 

Bug Fixes 

1. Fixed an issue related to mitigation data not appearing in the UI when changes were updated to the case data (TT-11329). 

2. Fixed an issue where importing an excel file with 0 in shield wire or phase wire data would save as blanks (TT-11268). 

3. Fixed an issue in the steady state calculation where the pipe names could not be saved with blanks or with special characters (TT-11002). 

HDD PT  

Bug Fixes  

1. Fixed an issue with Drilling Fluids and Mud Management where the reports were not rounding dec digits in metric unit set (TT-11281).  

2. Fixed an issue in the Installation and Stress Analysis – Vertical calculation where input data would get cleared when measured depth was saved with 0 value (TT-11264). 

3. Fixed an issue with importing elevation profile always imports the distance as feet, regardless of the unit set selected (11249). 

4. Fixed an issue where the reports were generating without the additional attached pdf’s (TT-11210).  

API Toolbox 

Bug Fixes  

1. Issue fixed for checklist data not showing up upon import if CML has no data in template while importing 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.05.17 

PLTB

Enhancements 

1. Pipeline Corrosion Gas and Liquid applications have been updated with pipe regulatory codes for CSA Z662, in addition to the existing B31.4 and B31.8 codes. These include catalog changes for design class and location factor, joint type and joint factor, and temperature derating factor. 

2. Wall Thickness and Design Pressure applications in Design & Stress Analysis module have been updated to allow for support of Hydrostatic Design basis based on Design Temperature (TT-10935). 

   1. This is in line with the latest revisions issued by the Plastic Pipe Institute.

   2. Choosing a Design Temperature now supports the appropriate reference or interpolated multiplicative factor in the calculation.  

Bug Fixes 

1. Fixed an issue in Pipeline Crossing applications where the results table in the report was not generating after setting the case units to PLTB_Metric (CEPA) (TT-11244). 

2. Fixed an issue in Gas applications where the locations factors being displayed corresponded to Liquid ones (TT-11307). 

AC Mitigation 

Enhancements 

1. AC Mitigation application result plots have been updated to show only the regions of the pipeline sections that are coupled to powerlines or towers (TT-11070). 

Bug Fixes 

1. Fixed an issue where Excel files exported from AC Mitigation Steady State applications were not being able to be opened. (TT-11238). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.05.10 

PLTB 

Enhancements 

1. Reinforcement of Welded Branch Connection calculation in Pipeline Facilities Gas and Liquid applications have been updated with pipe regulatory codes for CSA Z662 in addition to the existing B31.4 and B31.8 codes. These include catalog changes for design class and location factor, joint type and joint factor, and temperature derating factor. 

Bug Fixes 

1. Fixed an issue in Pipeline Facilities Gas where the Relief Valve: Sizing for Gas or Vapor Service application was calculating the Gas Volume Lost incorrectly (TT-11292). 

AC Mitigation 

Enhancements 

1. Added the ability for users to select the start point and orientation for drawing section lines in their analysis (TT-11050, TT-11268). 

Bug Fixes 

1. Fixed an issue where .kml/.kmz files in AC Mitigation PowerTool applications were not importing pipelines appropriately from the ESRI map to AC map. (TT-11268). 

2. Fixed an error where the Google Map version was not calculating sections and angles for reference lines other than pipe 1 as the reference. 

PRCI Thermal Analysis 

Enhancements 

1. The PRCI Thermal Analysis has been updated to allow a user to run calculations for branch outer diameters less than 2 * wall thickness (TT-11212). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.05.03 

PLTB 

Enhancements 

1. Pipeline Crossing Gas and Liquid (all calculations) have been updated with pipe regulatory codes for CSA Z662 in addition to the B31.4 and B31.8 codes. These include catalog changes for design class and design factor, design class location, operating class, joint type, joint factor, and temperature derating factor. 

2. Design and Stress Analysis Gas and Liquid have been updated with pipe regulatory codes for CSA Z662 in addition to the B31.4 and B31.8 codes. These include catalog changes for design class and design factor, design class location, operating class, joint type and joint factor, and temperature derating factor. The following calculations in Gas and Liquid were updated: 

   1. Design Pressure 

   2. Wall Thickness 

   3. Maximum Allowable Pipe Span Length 

   4. Restrained Pipeline Stress Analysis 

   5. Unrestrained Pipeline Stress Analysis 

AC Mitigation 

Enhancements 

1. The plots in the AC Mitigation application have been updated to show the section line numbers similar to the GIS mapping sectioning to eliminate any confusion between section line number vs. section number. (TT-11268). 

PRCI Thermal Analysis 

Enhancements 

1. The PRCI Thermal Analysis has been updated to allow a user to run calculations for metal chemistry values outside of model validations defined (TT-10683). 

   1. Users are now given all calculation input validation messages for their pipe chemical component if they tab or click out of a chemical component and it’s outside the valid input range. 

   2. If a user clicks ‘Calculate’, they are shown in one message when a case analysis is flagged as being outside the model. 

   3. Generating a report for values outside the range will now be included in the disclaimer message in the footer of the report. 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.04.26 

AC Mitigation 

Bug Fixes 

1. Fixed an issue in AC Mitigation where a mitigated case will show warning message upon reloading the case (TT-11216). 

2. Issue fixed where ACPT case won’t run with more than 1500 section lines (TT-11235). 

3. Issue fixed where powerlines weren’t getting pulled into ACPT map properly (TT-10413). 

PLTB 

Bug Fixes 

1. Fixed an issue in CEPA Track Load, CEPA Wheel Load and CEPA Grid Load where units on reduced wall thickness are not converted properly before calculations (TT-11217). 

HDD PowerTool 

UI Update 

1. Name of Hydraulic Fracture Analysis calculation changed to HDD Borehole Stability. 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.04.05 

AC Mitigation 

Bug Fixes 

1. The following issues were fixed in the AC Mitigation PowerTool Steady State applications: 

   1. A scroll bar was added on the drop-down menu for map section where user’s sections, powerlines, etc. are stored (TT-11413).

   2. Distribution anode was incorrectly being deleted for a segment if parallel mitigation was removed (TT-11051).

   3. Fixed an error where the unmitigated results were incorrectly displaying mitigated results when parallel mitigation was true with 0 resistance (TT-11115).

API Toolbox 

Bug Fixes 

1. Fixed an issue in the 653 Report Builder where the final report was not generating unless the user had entered in data in the Internal Notes section (TT-11187, TT-11194). 

PRCI RSTRENG 

Enhancements 

1. The decimal precision of wall thickness in the report has been updated to 4 decimal places in line with industry standards (TT-11101). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.03.29 

PLTB 

Enhancements 

1. New UI updates for Pipeline Pumps application to enhance the appearance and usability of the application. 

2. New UI updates for input validations, required fields, warning and error messages for Polyethylene Pipes (Gas & Liquid) to enhance usability and intuitiveness. 

Bug Fixes 

1. Fixed an issue in Hydraulics (batch run) where a warning message was displayed in the excel results to repair the excel (TT-11158). 

API Toolbox 

Enhancements 

1. API 653 Report Writeup has a new section to add internal notes for reference that will not go to the report. 

Bug Fixes 

1. Fixed an issue in API 1102 applications where the validation for the ratio of Wall Thickness to Outside Diameter was being incorrectly calculated (TT-11147). 

AC Mitigation 

Enhancements 

1. Released new feature where a warning message is displayed to the user when a section line is crossing the same powerline or pipeline more than once in Steady State calculation (TT-11138).  

PRCI OBS 

Bug Fixes 

1. Fixed an issue in the level 3 pipe calculator section where the results in metric unit set were incorrect for ‘in air weight’ and ‘submerged weight’ (TT-11096). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.03.22 

HUB Platform 

Enhancements 

1. New pane for Customer Support menu pane to enhance the appearance and usability. 

PLTB 

Enhancements 

1. New UI updates to the following applications to enhance the appearance and usability of the application: 

   1. Cathodic Protection

   2. PLTB Miscellaneous

   3. Compressors 

2. New UI updates for input validations, required fields and warning and error messages in the below applications to enhance usability and intuitiveness: 

   1. Pipeline Crossing

   2. Pipeline Facilities 

Bug Fixes 

1. Fixed an issue in API 1102 applications where the validation for the ratio of Wall Thickness to Outside Diameter was being incorrectly calculated (TT-11147). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.03.15 

PLTB 

Enhancements 

1. New UI updates for Pipeline Corrosion applications to enhance the appearance and usability of the application. 

2. CEPA applications in Pipeline Crossings now support a Metric unit set that is used in the standard CEPA calculations. 

HDD PowerTool 

Bug Fixes 

1. Fixed an issue where Plastic Pipe applications were not loading saved data (TT-11135, TT-11141, TT-11143). 

API Toolbox 

Enhancements 

1. Users in all API Toolbox modules are now able to share their cases with users outside of their company 

AC Mitigation 

Enhancements 

1. Released new feature which gives the user the ability to now import mitigation data via an excel file similar to section line import in the Steady State Application 

Bug Fixes 

1. The following issues have been fixes in AC Mitigation applications:

   1. The list of sections in the Mitigation tab were not condensed inside Section box (TT-11017).

      1. This menu was missing a scroll bar

   2. Distributed anode in the Mitigation tab was incorrectly deleted when a user clicked on that field (TT-11051). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.03.8 

PLTB 

Enhancements 

1. New UI updates for the following modules to enhance the appearance and usability of the application:

   1. AGR & GPRA

   2. ALR

   3. Pipe Blast Gas and Liquid 

HDD PowerTool 

Enhancements 

1. Released a new calculation model in the Hydraulic Fracture Analysis application that now includes Average Delfts model (Average Soil Layer).

   • This considers the stress caused by soil layers above the layer in contact with the bore profile for Hydraulic Fracture Analysis. 

2. Released Sensitivity Analysis study (Manual and Automated) for Polyethylene Pipe – Pull Force & Installation Stresses  

API Toolbox 

Enhancements 

1. Improvement made on the Appendix page loading to cause it not to fluctuate during report generation process. 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.03.01 

PLTB 

Enhancements 

1. New UI update for Polyethylene Pipe Gas and Liquid modules to enhance the appearance and usability of the application. 

HDD PowerTool 

Enhancements 

1. Released Sensitivity Analysis study (Manual and Automated) for Polyethylene Pipe – Pull Force & Installation Stresses (Specific Radius of Curvature) for both Google and ESRI maps. 

AC Mitigation 

Enhancements 

1. The performance of calculations for AC Mitigation applications have been improved, decreasing the time to calculate by nearly 95%. 

Bug Fixes 

1. Fixed an issue where powerlines were incorrectly duplicated when a user repeatedly pressed the ‘Save’ button on their case (TT-11078). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.02.23 

PLTB 

Enhancements 

1. The design guide revision for HDD Lite Steel Pipe applications has been updated to the current standard (TT-11053). 

   1. Reports run from these applications now reference the following: PRCI; Installation of Pipelines by Horizontal Directional Drilling An Engineering Design Guide; 2015.

2. New UI look update for Regulators & Meters applications to enhance the appearance and usability of the applications. 

3. Added new feature in Pipeline Facilities to display validations, warnings and error messages.

HDD PowerTool 

Enhancements 

1. Released sensitivity analysis study (Manual and Automated) for “Steel Pipe - Pull Force and Installation Stresses – Vertical and Horizontal" for both Google and ESRI maps. 

AC Mitigation 

Enhancements 

1. Released new feature which gives the user the ability to now import mitigation data via an excel file similar to section line import in the Steady State Application.

2. Released new feature where case import now supports mitigation via an excel file.

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.02.16 

PLTB 

Bug Fixes 

1. Fixed an issue in PLTB applications where images uploaded to a case would not show in the printed report (TT-10942). 

Crossings Workflow 

Bug Fixes 

1. Fixed an issue where images uploaded to a case would not show in the printed report (TT-10994). 

HDD PowerTool 

Bug Fixes 

1. Fixed an issue for GIS applications where Pipe Entry and Pipe Exit were not calculating (TT-10976). 

API Toolbox 

Bug Fixes 

1. Fixed an issue where the Component TML Record would hang up loading after importing 200 + records (TT-11035). 

PRCI RSTRENG 

Bug Fixes 

1. Fixed an issue where calculations in Metric were incorrect due to an improper unit conversion on the profile pit data (TT-11056). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.02.09 

PLTB 

Enhancements 

1. New UI look update for Pipeline Facilities Gas and Liquid modules to enhance the appearance and usability of the application. 

2. New UI look update for Hydraulics Gas and Liquid modules to enhance the appearance and usability of the application. 

3. API 1102 Pipeline Crossing Highway and Railroad applications in Pipeline Crossings have been updated to allow a user to run calculations outside of model validations defined by API 1102. 

   1. Users are now given all calculation input validation messages in one message when a case analysis is flagged as being outside the model. 

   2. The following options will be available to the user: 

      1. Press ‘OK’ to stop calculation and edit input data. 

      2. Press ‘Proceed Anyway’ to run the calculations outside the model 

   3. Generating a report will now include a disclaimer message is now included in the footer of the report logging all model validations flagged. 

HDD PowerTool 

Enhancements 

1. Released sensitivity analysis study (Manual and Automated) for “Steel Pipe - Pull Force and Installation Stresses – Vertical" for both Google and ESRI maps. 

Bug Fixes 

1. Fixed an issue where the borehole profile was displayed incorrectly when multiple curved up/down slopes were configured consecutively (TT-10868). 

AC Mitigation 

Bug Fixes 

1. Fixed an issue where the order of the powerlines was reversing in Steady State calculation. 

2. Fixed an error where a random pipeline was added in the Fault Current configuration after saving a case. 

Thermal Analysis (Hot Tap) 

Bug Fixes 

1. Fixed an issue where the ‘Pipe Content Temperature’ was being mapped to ‘Pipe Temperature’ in the PDF report (TT-10998). 

RSTRENG 

Bug Fixes 

1. Fixed an issue related to saving cases when required parameters were not entered (TT-10967). 

2. Fixed an issue where images were not being added to the report via import feature (TT-10885). 

API Inspectors Toolbox 

Bug Fixes 

1. Fixed an issue where the pressure calculation within Shell and Head calculation did not take ‘SH’ variable into consideration. 

2. Fixed an issue where the ‘tnom’ values are not updating in the Component Life calculation within API 510 module (TT-10900). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.01.22 

PLTB 

Enhancements 

1. New UI look update for Hydraulics Gas and Liquid modules to enhance the appearance and usability of the applications 

Bug Fixes 

1. Fixed an error in HDD Lite – Pull Force and Installation Stresses – Vertical, where the angle field needs to be disabled when straight and level bend combination is selected 

2. Fixed an error in HDD Lite – Pull Force and Installation Stresses – Vertical & Horizontal Plane, where the angle field needs to be disabled when straight and level bend combination is selected 

HDD PowerTool 

Bug Fixes 

1. Fixed an error related to unit conversions in the borehole profile impacting the conversion of the units in the section results for: 

2. Steel Pipe - Pull Force and Installation Stresses - Vertical 

3. Steel Pipe - Pull Force and Installation Stresses - Vertical & Horizontal Plane 

4. PE Pipe - Pull Force and Installation Stresses (Specific Radius of Curvature) 

5. Installation of Cables in Conduits and Pipes 

AC Mitigation 

Bug Fixes 

1. Fixed an error where the soil resistivity and mitigation data would reset in the sections tab when calculate button was clicked in the map to calculate the section angles and distances 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.01.12 

PLTB 

Bug Fixes 

1. Fixed an issue in ‘Pipeline Crossing Highway’ and ‘Pipeline Crossing Railroad’ where the plots in the results were not getting updated based on user entered values 

2. Fixed an error in the following PE Pipe Applications where the reference impact factor was incorrectly printed for actual pipe impact factor in the report (TT-10893): 

   1. Live Load: H2O Load on Buried Pipe 

   2. Live Load: Unpaved buried PE Pipe 

   3. Live Load: Multi Wheel not over Buried PE Pipe 

   4. Live Load: Single Wheel over Buried PE Pipe 

   5. Live Load: Muti Wheel over pipe conc load 

Hydrotest PowerTool 

Enhancements 

1. Added a new survey file import to the existing feature to select different section creation criteria 

AC Mitigation 

Bug Fixes 

1. Fixed an issue where the depth of cover table was not retaining user entered data and was resetting to the data from the pipe table 

2. Fixed an error where the results for distance were incorrect in metric unit set 

3. Fixed an error in fault current where a random pipe got added to a new case configuration

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2024.01.05 

API Toolbox 

Enhancements 

1. Added a refresh button in the 510 module’s Report Appendix B calculations for shell and head calc, that will pull updated information from base page to these calcs pages.

PLTB 

Enhancements 

1. New UI look update for Design & Stress Analysis Gas and Liquid modules to enhance the appearance and usability of the applications. 

Bug Fixes 

1. Fixed an issue in Parallel Line Explosive Charge applications where users would be incorrectly blocked on calculation if they changed their units (TT-10835). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.12.27 

AC Mitigation 

Bug Fixes 

1. Fixed an issue where the case did not execute once the case was imported and saved  

Enhancements 

1. Released new look and feel for the user interface of the Fault Current application while updating user experience of existing features. 

HDD PowerTool 

Bug Fixes 

1. Fixed an error where the borehole profile was being represented incorrectly in the plot when the section was configured as straight and level 

Hydrotest PowerTool 

Bug Fixes 

1. Fixed an error where the configured sections of the pipeline were not displayed in the map 

API Toolbox 

Bug Fixes 

1. The following issues were fixed in API Toolbox: 

2. In API 653, the location dropdown would open when new record was created 

3. In API 653 Nozzle, the dropdown value would change to the value that was typed in for searching and filtering 

4. In API 570 Report Builder, renamed circuit ID to description  

5. In Asset, added edit button for Tank and Vessel to match what Pipe has 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.12.25 

API Toolbox 

Bug Fixes 

The following issues were fixed in API Toolbox: 

1. Improved performance for 510 Report Builder where loading was time excessive 

2. In API 570 remaining life page, the sch dropdown value would change to the value that was typed in for searching and filtering 

3. In API 570 CML, the size dropdown value would change to the value that was typed in for searching and filtering 

4. In API 510 CML, the size dropdown value would change to the value that was typed in for searching and filtering 

5. In 510 shell calculations (app A), improved performance when saving was taking a long time while displaying “loading please wait” spinner 

6. In API 510 CML, the first-row data was getting erased when entered manually 

7. In API 510 app A, user was not able to input ‘t act’ values  

8. In API 653, removed blank rows/cells in the tables that did not contain any data for both Word and PDF reports 

9. In Asset, the critical sections were getting erased after editing any values 

10. In Asset, the MOV report was not generating  

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.12.20 

HUB Platform 

Enhancements 

Released the following updated tab feature: 

1. The tabs do not wrap to multiple rows 

2. Calculation name is displayed as a tooltip when hovered over the tab 

3. 6+ tabs get stacked in a dropdown for easy access to the last tab (tab 5) 

4. Streamlined opening and closing of tabs   

AC Mitigation 

Enhancements 

1. Released new look and feel for the user interface of the Steady State application while updating user experience of existing features. 

API Toolbox 

Bug Fixes 

1. The following issues were fixed in API Toolbox: 

2. API 653 module users were unable to scroll through the records of the AST Nozzle Calculation application (TT-10737). 

3. In API 510 module’s Report Head module, the tmin for Head 3 was not populating based on information provided on base report builder page and in head calculation  (TT-10537). 

HDD 

Bug Fixes 

1. Fixed an issue in HDD PowerTool where straight level sections were not having their angle and measured lengths shown in the report (TT-10758). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.12.15 

API Toolbox 

Bug Fixes 

1. Fixed an issue where signatures were not getting uploaded into the Final Report Builder for each associated module (TT-10857). 

HDD 

Bug Fixes 

1. Fixed an issue in HDD PowerTool where applications with sections defined by the user were not saving when edited (TT-10812). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.12.08 

Asset Management 

Enhancements 

1. Inspection date fields categorized as UT and VT Inspections dates on Piping Data is now captured 

2. Uploaded reports and images to a company asset are now shared across users of the same company 

3. Frequency interval now accepts decimal values as compared to earlier where it was accepting only whole numbers as years 

HDD 

Bug Fixes 

1. Fixed an issue in HDD PowerTool where cases were not saving their input data (TT-10812). 

PLTB 

Bug Fixes 

1. Fixed an issue in Purging Calculations applications where the following quantities were not being calculated correctly (TT-10657): 

• Purge gas injection pressure 

• Method B calculations 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.10.20

HUB Platform

Enhancements

1. Released AutoCAD import within DB Import to create a borehole profile that can be repurposed in HDD PowerTool for the calculations listed below 

2.  Cables in Conduits 

   1. Installation of Cables in Conduits and Pipes - Google Map 

   2. Installation of Cables in Conduits and Pipes - GIS 

3. Polyethylene Pipe 

   1. Pull Force & Installation Stresses (Specific Radius of Curvature) - Google Map 

   2. Pull Force & Installation Stresses (Specific Radius of Curvature) - GIS 

4. Steel Pipe 

   1. Pull Force & Installation Stresses - Vertical - Google Map 

   2. Pull Force & Installation Stresses - Vertical & Horizontal Plane 

   3. Pull Force & Installation Stresses - Vertical GIS 

   4. Pull Force & Installation Stresses - Vertical and Horizontal GIS 

API Toolbox

1. CML performance improved for all three modules API 653, API 570 and API 510 PRCI OBS (On-Bottom Stability)

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.09.08

PLTB 

Bug Fixes 

1. Fixed an issue where the following reports were not generating: 

   1. Accidental Release from Liquid Hydrocarbon Pipeline (TT-10595)

   2. Purging Calculations (Gas) (TT-10580,TT-10583,TT-10586) 

PRCI Thermal Analysis 

Bug Fixes

1.  Fixed an issue in PRCI Thermal Analysis where cases were not deleting (TT-10540). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.09.04

HUB Platform

Enhancements  

1. Menu updated to make accessing the applications/calculations easier in the respective modules making it more user intuitive and user friendly. Nice introduction to this update is visible to users when logged in first time after this production update 

Crossings Workflow 

Bug Fixes 

1. Fixed an issue in Crossings Workflow where cases with CEPA equipment analyses were incorrectly mapping the following fields in their respective reports (TT-10502): 

   1. Installation Temperature 

   2. Temperature Differential 

Hydrotest PowerTool

Bug Fixes 

1. Fixed the following issues in Hydrotest PowerTool: 

   1. Cases data was unable to be pulled up from the Hierarchy when set to ‘Modules & Cases’ (TT-6669). 

   2. The ‘Established MAOP’ was not being written to the ‘MAOP’ for the respective section (TT-6669). 

   3. The report’s Summary page was incorrectly reporting US values and texts for cases configured in Metric units (TT-10516). 

PLTB 

Bug Fixes 

1. Fixed an issue in CEPA Track Load and Grid Load Analysis applications where the input of Differential Temperature into the calculation was resulting in incorrect values (TT-10505). 

2. Fixed an issue in Surge Analysis – Water Hammer where fluids drop-down had the following choices removed that were invalid or SG < 0.63 (TT-9547): 

   1. Butane-n 

   2. From Attributes 

   3. User Defined 

3. Fixed an issue in HDD Lite > PE Pipe > Pull Force & Installation Stress reports where the ‘Pull Force on Pipe at Point A:’ value had an incorrect value mapped to it (TT-10492). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.08.28

AC Mitigation  

Enhancements  

1. The ESRI Map in Steady State and Fault Current applications now show the names of powerlines and pipelines configured in the case instead of the format ‘Pipe No.’ or ‘TLine No.’ format for pipelines and powerlines respectively. 

PLTB 

Enhancements 

1. The following applications now default their respective ‘Include Interpolation Method’ option to ‘Yes’ on creation of a new case: 

2. Pipeline Crossing (TT-9394): Track Load Analysis 

3. Pipeline Testing (TT-9776): 

   1. Gas Pipeline Blowdown Semiempirical Model - Report No. 87-2 - Gas (Gas) 

   2. Gas Pipeline Blowdown Semiempirical Model - Report No. 87-2 – Sizing (Gas) 

Bug Fixes 

1. Fixed a report issue in API 1102 Pipeline Crossing Highway and API 1102 Pipeline Crossing Railroad applications where the Temperature drop-down in ‘T - Temperature Derating Factor’ section was incorrectly showing ‘121.1 or less deg F’ regardless of units chosen (TT-10562). 

2. Fixed an issue in CEPA Wheel Load Analysis applications where the input of Differential Temperature into the calculation was resulting in incorrect values (TT-10505). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.08.18

AC Mitigation  

Bug Fixes  

1. Fixed an issue in the AC Mitigation applications where the report footer “Prepared Using: “ message was incorrectly printing “Prepared Using: Pipeline Toolbox”. 

2. Fixed an issue in AC Mitigation - Steady State GIS application where the satellite/terrain button for the ESRI map was not visible (TT-10467).   

Crossings Workflow  

Enhancements  

1. Crossings Workflow now defaults ‘Include Interpolation Method (for Influence Coefficient)’ to ‘Yes for Track equipment cases when a pipe is added (TT-9394). 

Bug Fixes  

1. Fixed an issue in Crossings Workflow where Metric cases with CEPA Wheel Load equipment was not converting ‘Axle Separation 1’ to ‘ft’ from ‘m’ when changing the cases units to US units (TT-10435). 

PLTB 

Bug Fixes 

1. Fixed the following issues in API 1102 Pipeline Crossing Railroad applications: 

   1. A confirmation message for calculations (‘Calculation complete.’) was incorrectly being shown if the user hit ‘Enter’ but their inputs were outside the model (TT-9828). 

   2. Changing ‘Rail Loading’ radio button back to ‘Cooper E-80' was not defaulting the ‘Applied Design Surface Pressure’ to 13.9 psi in US units (TT-9155). 

2. Fixed the following issues in API 1102 Pipeline Crossing Highway applications: 

   1. Fixed an issue in API 1102 Pipeline Crossing Highway applications where the  confirmation message for calculations (‘Calculation complete.’) was incorrectly being shown if the user hit ‘Enter’ but their inputs were outside the model (TT-9828). 

   2. Fixed an issue in Surge Analysis – Water Hammer where the ‘Graph: Flow Rate’ graph was not mapping the flow rate values to the unit of measure configured in the ‘Operating Parameters’ section (TT-9546). 

PRCI RSTRENG 

Bug Fixes 

1. Fixed the following issues in RSTRENG: 

   1. The report wouldn’t generate if ‘Line ID’ had the special character ‘&’ in it (TT-10382). 

   2. The ‘Potential Impact Radius’ was removed (TT-8330). 

PRCI Thermal Analysis 

Bug Fixes 

1. Fixed an issue in PRCI Thermal analysis where data inputs would load incorrectly in the values saved in the application database instead of with respect to the unit of measure saved on the case (TT-10208). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.08.11

HUB Platform

Bug Fixes

1. Removed chatbot integration from HUB 

Crossings Workflow

Bug Fixes  

1. Fixed an issue in Crossings Workflow where Excel exports would not generate for cases that had PE Pipe equipment (TT-9719). PLTB 

PLTB

Bug Fixes 

1. Fixed an issue in Gas Lost in Section of a Full Bore Rupture where ‘Average Compressibility Factor’ was being calculated incorrectly (TT-10365). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.08.04

HUB Platform

HDD PowerTool  

Bug Fixes

1. Fixed an issue in AC Mitigation - Steady State GIS application where the satellite/terrain button for the ESRI map was not visible (TT-10467). 

Crossings Workflow

Bug Fixes  

1. Fixed the following issues in Crossings Workflow for CEPA Wheel Load equipment analyses (TT-10435): 

   1. Setting ‘Pavement Type’ to ‘Flexible Pavement’ was printing ‘None’ in the report. 

   2. 'Axle Separation 1’ was not being converted correctly for cases in Metric units. 

PLTB 

Bug Fixes 

1. Fixed an issue in CEPA Wheel Load Analysis where ‘Pipe Regulator Code’ was not being mapped to the report (TT-10435). 

2. Fixed the following calculations issues in PLTB-G > AGRA & GPRA applications: 

   1. Accidental Gas Release through a Small Hole in Pipeline – Gas calculations for ‘Gas Discharge Flowrate’ and ‘Gas Volume Discharged/Lost’ were being calculated incorrectly (TT-10436). 

   2. Gas Lost in Section of a Full Bore Rupture was calculating ‘Average Compressibility Factor’ incorrectly (TT-10365). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.07.28

 HUB Platform  

Enhancements  

1. Widget structure changed to UI tabs. Users will scroll less vertically to view opened calculations and would be able to compare calculations side by side by using tab out functionality. 

2. Canvas feature is changed to Dashboard and moved to right side of screen. All previously saved canvas will appear as dashboards. 

HDD PowerTool  

Bug Fixes  

1. Fixed the following issues in HDD PowerTool: 

   1. Reports were not generating for (TT-10414, TT-10421, TT-10428): 

      1. ATL – Allowable Tensile Load for PE Pipe During Pull-in Installation 

      2. PE – Pipe – Post Installation Loads and Deflection 

      3. PE – Pipe – Pull Force & Installation Stress 

2. Pull Force and Installation Stresses applications  ‘24 Hr Modulus of Elasticity’ has been has been renamed to ‘Pullback Modulus of Elasticity (typically short-term or 10 hr)’ to be consistent with industry usage (TT-10363). 

PLTB 

Bug Fixes 

1. Fixed an issue in Pull Force and Installation Stresses applications where ‘24 Hr Modulus of Elasticity’ has been renamed to ‘Pullback Modulus of Elasticity (typically short-term or 10 hr)’ to be consistent with industry usage (TT-10363). 

2. Fixed an issue in Surge Analysis – Water Hammer application where a user would be prohibited from completing a calculation if the ‘User Defined Average Adiabatic Bulk Modulus’ checkbox was checked (TT-9549, TT-10431). 

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.05.26 

HUB Platform 

Enhancements 

1. Batch run active for:

   1. Wheel Load Gas and Liquid 

   2. Track Load Gas and Liquid 

   3. GPTC Guide Appendix G192-15 – Design of Uncased – Liquid Pipeline Crossing 

   4. GPTC Guide Appendix G192-15 – Design of Uncased – Gas Pipeline Crossing 

   5. CEPA Wheel Load Gas and Liquid 

   6. CEPA Track Load Gas and Liquid 

   7. CEPA Grid Load Gas and Liquid 

2. Sensitivity Analysis  

   1. Wheel Load Gas and Liquid 

Hydrotest PowerTool 

Bug Fixes 

1. Fixed an issue in Hydrotest PowerTool report where the report footer “Prepared Using: “ message was incorrectly printing “Prepared Using: Pipeline Toolbox” instead of “Prepared Using: Hydrotest PowerTool”. 

PLTB 

Enhancements 

1. Links to product guides have now been added next to the title of all of PLTB (G &L) > Pipeline Crossing module calculations. 

PRCI Thermal Analysis 

Enhancements 

1. The following enhancements have been made to the PRCI Thermal Analysis application: 

   1. A link to the product guide for PRCI Thermal Analysis has now been added next to the title of the application. 

   2. ‘Maximum Inner Pipe Temperature’ values in the ‘Results’ section of the report are now highlighted green when the value is below the safe inside surface temperature limit. 

   3. Links to product guides have now been added next to the title. 

Bug Fixes 

1. The following issues have been resolved in the PRCI Thermal Analysis report: 

   1. The safe inside surface temperature limit flag for ‘Maximum Inner Pipe Temperature’ was incorrectly marked in the ‘Results’ section. 

   2. All failed values are now highlighted in red and a warning message is provided. 

   3. The Maximum Inner Temperature was printing 1 dec digit of precision compared to 2 dec digits of precision in the desktop application. 

   4. The report footer “Prepared Using: “ message was incorrectly printing “Prepared Using: Pipeline Toolbox” instead of “Prepared Using: PRCI Thermal Analysis”. 

   5. The report was incorrectly printing ‘Sleeve’ instead of the Geometry selection made in the application (TT-10131). 

   6. The ‘Joint Details’ section of the report was not printing inputs related to Branch problems. 

   7. The ‘Results’ section was overlapping the second page of the report (TT-9614). 

Title: Production Scheduled Maintenance - Release Notes

Version: C-2023.05.12

HUB Platform

Enhancements

1. The Case Header on Pipeline HUB applications now opens and closes for the user automatically on creation and saving of a case.

2. The HUB bot now routes to the Training HUB Product Learning Library and Training Schedule links available in the Support menu.

AC Mitigation

Bug Fixes

1. Fixed an issue in AC Mitigation PowerTool applications where case data was incorrectly loaded and caused users to encounter the following message after hitting the ‘Calculate’ button: “Input Data Error Detected. Please verify the data and try again.”

API Inspectors Toolbox

API 510

Bug Fixes

1. Fixed an issue in Report Head application where an incorrect value for Interpolation Design Temperature was being used for the calculation of Head 3.

2. Fixed an issue in Report Shell Calc application where the calculation for S in the Internal Pressure – Minimum Thickness Calculations was incorrectly using the temperature from Shell 2 area.

Asset Management

Bug Fixes

1. Fixed an issue in Asset Management where notes on a vessel were being overwritten.

Crossings Workflow

Bug Fixes

1. Fixed an issue in Crossings Workflow where PE Pipe Equipment Analyses were incorrectly getting unit conversions applied on save (TT-10016).

   • This affected the following parameters on an Equipment Analysis:

     • Wheel Load

     • Wheel Imprint Contact Area

PLTB

Enhancements

1. The Reinforcement of Welded Branch Connection applications in Pipeline Facilities have been updated to allow a user to run calculations outside of model validations defined by ASME B31.8 and ASME B31.4.

   • Users are now given all calculation input validation messages in one message when a case analysis is flagged as being outside the model.

   • The following options will be available to the user:

     • Press ‘OK’ to stop calculation and edit input data.

     • Press ‘Proceed Anyway’ to run the calculations outside the model

   • Generating a report will now include a disclaimer message is now included in the footer of the report logging all model validations flagged

Bug Fixes

1. Fixed an issue in Polyethylene Pipe where the Pipe Material Designation was missing the PE Pipe choices from tables available from the Plastic Pipes Institute (TT-9689):

   • This affected the following applications:

     • Design Pressure

     • Wall Thickness – Polyethylene Pipe

   • The following values are now available:

     • PE 1404

     • PE 2406

     • PE 2708

     • PE 3408

     • PE 3608

     • PE 3710

     • PE 4608

     • PE 4708

     • PE 4710

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.04.28 

HUB Platform

Enhancements

1. The Case Header on Pipeline HUB applications now opens and closes for the user automatically on creation and saving of a case.

2. The HUB bot now routes to the Training HUB Product Learning Library and Training Schedule links available in the Support menu.

Crossings Workflow

Bug Fixes

1. Fixed an issue in Crossings Workflow where case analyses would not execute calculations.

PLTB

Enhancements

1. Links to product guides have now been added next to the title of all Wheel Load Analysis applications.

Bug Fixes

1. The following issues were fixed in the following Design & Stress Analysis applications (TT-9780):

   • Design Pressure

   • Wall Thickness

   • Unrestrained Pipeline Analysis

   • Restrained Pipeline Analysis

     • Gas application titles were updated to reflect the ASME B31.8 code.

     • Liquid application report references were updated to refer to CFR 195 and ASME B31.4.

2. The following issues were fixed in Polyethylene Pipe applications:

   • For all applicable Live Load applications, “Reference: Typical Impact Factors for Paved Roads” is now a greyed-out field out to indicate to the user that the value is a reference value for Impact Factor data input into the Impact Factor field located in the Live Load data section (TT-9719).

   • Live Load: AASHTO H20 Load on Buried PE Pipe - Unpaved or Flexible Pavement has been updated to address the following issues when a user inputted a Soil Height Above Pipe Crown outside the range 1.5 ft to 10 ft (TT-9778):

     • Vertical Pressure Due to Earth Load would incorrectly be inhibited from calculating.

     • A validation message has been added for values below 1.5 ft that informs the user they are outside the acceptable depth range for the model.

     • A new validation message now appears if a user enters in a value below 10 ft that says the Vertical Pressure due to H20 Live Load is negligible.

       • Upon clicking ‘OK’ in the validation message, the user’s value for Vertical Pressure due to H20 Live Load will now be populated with 0.

Title: Production Scheduled Maintenance - Release Notes

Version: C-2023.04.14

HUB Platform

Enhancements

1. Widgets now load a user’s last modified case (TT-5766).

   • If the user has not created a case, the demo case is loaded instead.

Bug Fixes

1. The TTI Support Wiki no longer loads with an error message (TT-9514).

PLTB

Bug Fixes

1. Fixed an issue in CEPA calculations where Longitudinal Stress components would print “NaN” when the Bedding Angle was set to 0 (TT-9924).

2. Fixed an issue in HDD Lite Steel Pipe > Pull forces & installation stresses where the report would fail to generate if a user deleted their “Level: Straight Section” in their profile configuration (TT-9861).

PRCI SEFW

Enhancements

1. PRCI Sleeve End Fillet Weld (SEFW) has been released to the Welding module.

   • The calculation allows welding engineers to calculate Stress Intensity Factors (SIFs) for the following cracking scenarios:

     • Weld Toe

     • Weld Root

     • Sleeve End

   • These calculations are based on research by PRCI from the report “PR-214-174517-WEB Sleeve End Fillet Weld Stress Intensity Factor Solutions”, August 2019.

Title: Production Scheduled Maintenance - Release Notes

Version: C-2023.03.14

PLTB

Enhancements

1. Hydraulics reports have been enhanced with a new template:

   • Input fields are now grouped into common tables such as:

     • Pipe Description

     • Operational Parameters

     • Fluid Properties

     • Results

   • Results that are highlighted in the widget (e.g. Pass or Fail) are now highlighted on the report.

   • If a widget has a plot, it is now included on the report.

   • Widgets with “Reduced Wall Thickness” entered by the user now have a specific note added.

Title: Production Scheduled Maintenance - Release Notes

Version: C-2023.03.10

HUB Platform

Enhancements

1. The following updates have been made to the application platform layout:

   • Support and User menu titles have been changed to modern icons.

   • The application ribbon has had a format and color change

   • Technical Toolboxes logo has been added on the ribbon

   • Navigator and Widget ribbon colors have been changed to match new color template

2. Adding a new widget to the canvas will now automatically scroll the user down to the location of the widget they’ve added.

3. The Case Header is now a combo-box that allows a user to search for a case (TT-5766).

PLTB

Enhancements

1. Added an interpolation value for CF value in the following Pipeline Testing > Gas Blowdown calculations (TT-9776):

   • Gas Pipeline Blowdown Semiempirical Model - Report No. 87-2 - Gas (Gas)

   • Gas Pipeline Blowdown Semiempirical Model - Report No. 87-2 – Sizing (Gas)

Bug Fixes

1. Fixed an issue in PLTB > Miscellaneous where API 1117- Movement of In-Service Pipeline wasn’t accounting for the Reduced Wall Thickness if the user included it in the calculation (TT-9886).

2. The following reports issues were fixed:

   • Pipe Blast reports were not highlighting ‘Blasting Conditions for Combined Stress Level’ properly when values were ‘Acceptable’ or ‘Not Acceptable’

   • Pipeline Corrosion Gas and Liquid reports had inconsistent alignment

   • Regulators & Meters reports had inconsistent organization of parameters in Operating Parameters

PLTB-G

Bug Fixes

1. Fixed an issue in the following Pipeline Testing > AGA Blowdown calculations where the data table lookup for CF was causing an incorrect calculation of blowdown time (TT-9776):

   • Gas Pipeline Blowdown Semiempirical Model - Report No. 87-2 - Gas (Gas)

   • Gas Pipeline Blowdown Semiempirical Model - Report No. 87-2 – Sizing (Gas)

Title: Production Scheduled Maintenance - Release Notes

Version: C-2023.02.24

API Inspectors Toolbox

API 653

Bug Fixes

1. Fixed the following issues in Shell Settlement (TT-7816):

   1. The Shell Settlement graph was getting inverted if a user clicked ‘Generate Graph’ after saving the report.

   2. R^2 and Smax were not changing in value when the widget units were changed from US to Metric.

Crossings Workflow

Enhancements

1. Added a component of Soil Overburden to the Hoop Stress for all CEPA equipment analyses.

PLTB

Enhancements

1. Added in all CEPA widgets a component of Soil Overburden to the Hoop Stress.

2. PLTB-G > Design & Stress Analysis reports have been enhanced with a new template:

   1. Input fields are now grouped into common tables such as:

      1. Pipe Description

      2. Operational Parameters

      3. Fluid Properties

      4. Results

   2. Results that are highlighted in the widget (e.g. Pass or Fail) are now highlighted on the report.

   3. If a widget has a plot, it is now included on the report

   4. Widgets with “Reduced Wall Thickness” entered by the user now have a specific note added.

Bug Fixes

1. Fixed an issue in PLTB reports where the Notes and References sections of reports was overlapping the footer (TT-9753, TT-9781).

PLTB-G

Bug Fixes

1. Fixed an issue in PLTB-G Colebrook-White widgets where the Base Pressure was being incorrectly mapped in the calculation of the Compressibility factor (TT-9732).

PLTB-L

Bug Fixes

1. Fixed an issue in Surge Analysis – Water Hammer where a user was unable to save a case (TT-9814).

Title: Production Scheduled Maintenance - Release Notes 

Version: C-2023.02.10

Data Tools

Enhancements

1. db Import now supports the import of Hot Tap desktop cases (TT-8887).

ESRI Map

Bug Fixes

1. Fixed an issue in ESRI Map import where kml files who had an attribute with a special character (e.g. &) were not being imported (TT-9615).

PLTB

Bug Fixes

1. Fixed an issue in API 1102 widgets where comparisons between values for input validations were incorrectly being done with their values on the widget (TT-723, TT-9755).

2. Fixed an issue in Purging Calculations reports where Results fields were being mapped with incorrect values (TT-9595, TT-9735).

PLTB-G

Bug Fixes

1. Fixed an issue in Gas Pipeline Blowdown – AGA Manual - Gas report where values were not mapped correctly to the ‘Pipe Description’ section (TT-9595, TT-9735, TT-9791).

2. Fixed an issue in Reinforcement of Branched Weld Connection – ASME B31.8 (Revision 10.0.0) (Gas) report where values were not mapped correctly to the ‘Branch Pipe Data’ section (TT-9748).

Title: Production Scheduled Maintenance - Release Notes

Version: C-2023.01.27

Pipeline HUB Platform

Enhancements

1. The following windows have been updated with the new Technical Toolboxes company logo:

   • Login landing page

   • Change Password menu

Crossings Workflow 

Enhancements

1. Added a ‘User Defined’ option to ‘Pavement Type’ that allows a user to define an Impact factor to use in an Equipment case for all CEPA crossings calculations.

Bug Fixes

1. Fixed the following issues in Crossings Workflow:

   • Cases that included PE Pipe equipment analyses were not printing reports (TT-9729).

   • Cases for Steel Pipe that included CEPA Crossings equipment analyses were incorrectly calculating the same results (TT-9632).

   • Impact factor is now applied and configured for each Equipment Analyses applied to each pipe.

     • Impact Factor in the following equipment analysis types was being incorrectly applied to all pipes configured by the user for the following analyses:

       • Wheel Load

       • Track Load

       • CEPA Crossings

Data Tools      

Enhancements

1. The option ‘DOC’ is no longer pre-populated in the Source Table when importing KML/Shape/GBD/Excel files (TT-8372).

Bug Fixes

1. Fixed the following issues in db Import:

   • Importing Pipe specification data was being prevented if the import file had a Fluid attribute defined in the import file (TT-9517).

   • The attribute mapping was incorrectly pre-populating the following even if not present in the import file:

     • Grade

     • Nominal Pipe Diameter

     • Outside Diameter

     • SMYS

     • Specification

     • Wall Thickness

     • Scheduled Number

PLTB  

Enhancements

1. All Design & Stress Analysis pipeline length data fields now have ‘inch’ as a unit of measure available (TT-9673).

Bug Fixes

1. Fixed the following reports issues:

   • Pull Force & Installation Stress report in HDD Lite PE Pipe was not generating.

   • The following reports in HDD Lite Steel Pipe were not generating (TT-9669, TT-9708, TT-9728):

     • Pull force & installation stresses – Vertical

     • Pull force & installation stresses – Vertical and Horizontal Plane

2. Fixed the following issues In Polyethylene Pipe reports:

   • Column alignment between the Gas and Liquid reports was inconsistent.

   • Calculations with diagrams in them didn’t have the corresponding image in the report aligned correctly with the respect to the center between the header and the Reference Data sections of the report.

   • Input data fields in the Reference Data section of the report were ordered in an incorrect manner.

   • Operating Parameters sections did not have proper bolding for the following sub-sections:

     • Pipe Soil Envelope Data

     • Live Data

   • ‘E’n/E’ was incorrectly titled as ‘E’n/E in the Results section

   • Design Pressure reports were incorrectly displaying the Nominal Pipe Diameter when the user chose Fiberglass as their Pipe Type

   • Live Load: AASHRO H20 Load on Buried PE Pipe – Unpaved or Flexible Pavement reports:

     • Multiple fields were not mapped into the report:

       • Impact Factor for Paved Road: Cover Depth

       • Impact Factor

     • ‘Vertical Pressure Due to H20 Live Load’ was incorrectly titled ‘Vertical Pressure due to Aircraft Load’

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2023.01.16

API Toolbox

API 653

Bug Fixes

1. Fixed an issue in Shell Settlement where the graph would appear inverted after saving a case.

PLTB- 

Enhancements

1. Added a ‘User Defined’ option to ‘Pavement Type’ in all CEPA crossings calculations that allows a user to input an Impact Factor of their choice. This applies to:

   • CEPA Track Load Analysis (Gas)

   • CEPA Wheel Load Analysis (Gas)

   • CEPA Grid Load Analysis (Gas)

Bug Fixes

1. Fixed an issue in API 1102 Pipeline Crossing Railroad and Highway Gas where the unit of measure for an input was not being considered in input validations.

   • E.g. A user would select Outside Diameter of 12.75 inch and Wall Thickness of 7.925 mm (.312 inch). The input validation for Wall Thickness/Outside Diameter being between 0.01 and 0.08 would incorrectly be calculated as 0.498 and the user would be prevented from running the calculation.

2. Fixed the following issues in Cathodic Protection reports:

   • Values and units of were not being wrapped on the same row.

   • Power Consumption of Cathodic Protection Rectifier (Gas) data points with ‘KWH’ were being displayed inconsistent from the widget UI.

   • Rudenbergs Formula For the Placement of an Anode Ground Bed (Gas) was displaying an extra row after the widget title in the report.

PLTB-L

Enhancements

1. Added a ‘User Defined’ option to ‘Pavement Type’ in all CEPA crossings calculations that allows a user to input an Impact Factor of their choice. This applies to:

   • CEPA Track Load Analysis (Liquid)

   • CEPA Wheel Load Analysis (Liquid)

   • CEPA Grid Load Analysis (Liquid)

Bug Fixes

1. Fixed an issue in API 1102 Pipeline Crossing Railroad and Highway Liquid where the unit of measure for an input was not being considered in input validations.

   • E.g. A user would select Outside Diameter of 12.75 inch and Wall Thickness of 7.925 mm (.312 inch). The input validation for Wall Thickness/Outside Diameter being between 0.01 and 0.08 would incorrectly be calculated as 0.498 and the user would be prevented from running the calculation.

2. Fixed the following issues in Cathodic Protection reports:

   • Values and units of were not being wrapped on the same row.

   • Power Consumption of Cathodic Protection Rectifier (Liquid) data points with ‘KWH’ were being displayed inconsistent from the widget UI.

   • Rudenbergs Formula For the Placement of an Anode Ground Bed (Liquid) was displaying an extra row after the widget title in the report.

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2022.12.16  

API Toolbox 

API 653 

Bug Fixes 

1. Fixed an issue in Report Config Appendix 653 where there was an extra MRT calculations drop-down choice titled 'MRT Calculations' in the Appendix B section. 

   • Now when creating a new case, users will only have 'AST Floor MRT Calculations' as a selectable option. 

Crossings Workflow 

Bug Fixes 

1. Fixed an issue in Crossings Workflow where 'Include Interpolation Method (for Influence Coefficient)' was not calculating an Ic value (TT-9556). 

   • This occurred for calculated m/n Influence factor values such that either m or n was an existing table value. 

PLTB-G      

Bug Fixes 

1. Fixed an issue in Track Load Analysis (Gas) where 'Include Interpolation Method (for Influence Coefficient)' was not calculating an Ic value (TT-9556). 

   • This occurred for calculated m/n Influence factor values such that either m or n was an existing table value. 

PLTB-L      

Bug Fixes 

1. Fixed an issue in Track Load Analysis (Liquid) where 'Include Interpolation Method (for Influence Coefficient)' was not calculating an Ic value (TT-9556). 

   • This occurred for calculated m/n Influence factor values such that either m or n was an existing table value. 

Title: Production Scheduled Maintenance - Release Notes  

Version: C-2022.12.09  

API Toolbox 

API 653 

Bug Fixes 

1. Fixed an issue in the Report Config Appendix 653 widget where user data saved in Floor MRT Evaluation would not be generated in the report. 

   • Previously, a user would create a report in the Floor MRT Evaluation, save it and, configure the drop-down in Appendix B to include MRT Calculations. 

   • Generating the final report however would not show the MRT Calculations in the appendix. 

Crossings Workflow 

Bug Fixes 

1. Fixed the following issues in Crossings Workflow that occurred on creation of a new case (TT-9480): 

   • If a Wheel or Track Load Analysis was included, ‘Depth of Cover’ was defaulting to 6.667 ft. 

   • Changing the ‘Soil Type’ drop-down to a value besides the default value ‘Granular Materials without Cohesion’ was reverting back after hitting ‘Calculate’.   

PLTB-G      

Enhancements 

1. PLTB-G reports in the following modules have been enhanced with a new template: 

   • Meters & Regulators 

   • Pipe Blast 

   • Pipeline Corrosion 

   • Input fields are now grouped into common tables such as: 

     • Pipe Description  

     • Operational Parameters 

     • Fluid Properties 

     • Results 

   • Results that are highlighted in the widget (e.g. Pass or Fail) are now highlighted on the report. 

   • If a widget has a plot, it is now included on the report 

   • Widgets with “Reduced Wall Thickness” entered by the user now have a specific note added. 

Bug Fixes 

1. Fixed the following issues in PLTB-G reports: 

   • Input and Results fields in Cathodic Protection reports were being displayed in decimal precision that did not match the widget. 

   • HDD Lite PE Pipe > Pull Force & Installation Stresses report was unable to be generated (TT-9531,TT-9536). 

   • API 1102 – Pipeline Crossing Highway (Gas) Results table had extra fluid properties rows in it. 

   • API 1102 – Pipeline Crossing Railroad (Gas) Results table had extra fluid properties rows in it. 

   • The title of ‘Total Longitudinal Stress @ MOP’ in the Results table for CEPA Crossings widgets was updated to ‘Total Longitudinal Stress at MOP’ to be consistent with titles of results fields in the widget. 

PLTB-L      

Enhancements 

1. PLTB-L reports in the following modules have been enhanced with a new template: 

   • Pipe Blast 

   • Pipeline Corrosion 

   • Input fields are now grouped into common tables such as: 

     • Pipe Description  

     • Operational Parameters 

     • Fluid Properties 

     • Results 

   • Results that are highlighted in the widget (e.g. Pass or Fail) are now highlighted on the report. 

   • If a widget has a plot, it is now included on the report 

   • Widgets with “Reduced Wall Thickness” entered by the user now have a specific note added. 

Bug Fixes 

1. Fixed the following issues in PLTB-G reports: 

   • Input and Results fields in Cathodic Protection reports were being displayed in decimal precision that did not match the widget. 

   • HDD Lite PE Pipe > Pull Force & Installation Stresses report was unable to be generated (TT-9531,TT-9536). 

   • API 1102 – Pipeline Crossing Highway (Gas) Results table had extra blank fluid properties rows in it. 

   • API 1102 – Pipeline Crossing Railroad (Gas) Results table had extra blank fluid properties rows in it. 

   • The title of ‘Total Longitudinal Stress @ MOP’ in the Results table for CEPA Crossings widgets was updated to ‘Total Longitudinal Stress at MOP’ to be consistent with titles of results fields in the widget.