/
Can OBS accurately model for HDPE Pipe?
Can OBS accurately model for HDPE Pipe?
- Robert Gedies
Owned by Robert Gedies
Dec 28, 2022
1 min read
Analytics
Loading data...
Except for the Level 3, the software can be used for stability assessment of HDPE pipes.
The level 3 uses a beam-element type of finite element approach that takes the stiffness of the pipe into account. However, the software has only been applied to steel pipes and no validation has been conducted on using Level 3 for analysis of flexible pipes.
Therefore, it is not recommended to use Level 3 at this stage.
, multiple selections available,
Related content
What is the reference height of current velocity in Level 3?
What is the reference height of current velocity in Level 3?
Read with this
Maximum Span Length rev1
Maximum Span Length rev1
More like this
In Level 2, if the horizontal factors are shown as >1 but the vertical are <1, is the pipeline considered stable?
In Level 2, if the horizontal factors are shown as >1 but the vertical are <1, is the pipeline considered stable?
More like this
How can we account for Sleeve/Fitting material? Does the analysis assumes the same composition for both header and fitting? Is so, is accounting for the difference as simple as inputting the composition with the highest CE value?
How can we account for Sleeve/Fitting material? Does the analysis assumes the same composition for both header and fitting? Is so, is accounting for the difference as simple as inputting the composition with the highest CE value?
More like this
Pipeline HUB Release Notes
Pipeline HUB Release Notes
More like this
Can I use OBS Level 2 or 3 to assess stability of power cables of wind turbines at crossings areas?
Can I use OBS Level 2 or 3 to assess stability of power cables of wind turbines at crossings areas?
More like this